Diagrams and Documents

A 1/8 DIN Indicating Temperature Controller. This is a Analog Controller built around ICL7107. Read more here Temperature Measurement and Control.

This is a 48-96 DIN Temperature Controller, it is mains operated, it is in a Industrial Plastic Housing. It is not meant for very harsh environments. Suitable for Control Panels in Control Rooms. It has a accuracy and linearity of 0.5%. It had options of on-off or time proportional control

Related Resources

• 1/8 DIN Digital Proportional On/Off Temperature Controller
• Temperature Calibrator Milli Volt Source
• Temperatur control simulation
• Automatic Temperature Controller
• West Instruments - Danaher Sensors and Controls

This could take current or voltage inputs from many remote transmitters, 4-20mA or 0-1 V Inputs. Then it would display the calibrated value in a LED display. The Zone number was a digital display. This serves as a monitor of process values. It had a analog output with a digital channel byte-word output for interface with other instruments.

Related Resources

• High Performance Temperature/Process Control
• 1/8 DIN 4 & 7-Channel Temperature or Process Scanner
• Multiplexer Circuits / Scanner Circuits
• PLC controlled analog multiplexer
  

This was built in a 96 X 96 Cabinet. It takes the process thru three timer delays and the pressure is measured after a certain stage and at a setpoint the process, job or DUT passes or Fails. It could be stress, strain or load testing on object. User Manual - Sequential Timer - Pressure Switch

Related Resources

• Two Stage Sequential Timer - del90004
• Sequential Timer - 555 - PDF
• Some Cyclic Timer Links
• Simple Sequential Circuit -State Machine
• Synchronous switching of multiple electrical devices